Frsky 7dB Patch Antenna

Shopping Cart

Related Forum Posts

ARTF Plane Posts
By Various

ARTF Pitts Posts
By Various

ARTF F-20 Tigershark Posts
By Various

Lingcat Posts
By Various

Predator Posts
By Various

RC Guides

Newbies Startup Guide Pt. 1
By Nigel Hawes

Newbies Startup Guide Pt. 2
By Nigel Hawes

Home » Rx / Tx Parts and Systems » 2.4ghz Systems and Rx » Frsky » Frsky 7dB Patch Antenna

Frsky 7dB Patch Antenna

01689 869887

In-Stock: 10+

Packed: 40.00g

Rating:

(8 reviews)
Avg. Rating :4
Rate it

£4.84

GiantShark Guarantee

7dB Patch Antenna

Returns

	Issues, Discrepancies, Product Enquires		Ask a question
	Tell a friend about this product		Lowest Price Guarantee

This product was added to our catalog on .

Reviews

by Carlos

Date Added: Wednesday 08 February, 2012

Another great product from Frsky increase range a lot but be carefull it only transmits to the front (white sticker)

by Peter

Date Added: Friday 09 December, 2011

Item delivered (as usual) next day, fitted to JR3810. No snagging issues with Tx handle or 35MHz aerial, but knurled ring very stiff to tighten onto connector. Will range check and report back later.

by roy

Date Added: Saturday 05 November, 2011

bought one for my Frsky 9ch radio and no way will it fit and because i would have to post it back to cod its just not worth the bother a toltal was of my money i dont understan wy he says its for a Frsky and its not so sorrey cod its a thumbs down for me

by Barry

Date Added: Saturday 29 October, 2011

Further to a previous review - I have found that this aerial does indeed fit a Futaba FF7 ! The topmost clip of the module needs a semicircle of material removing to enable the knurled collar of the aerial to be screwed home. If you put your module in first and then screw the aerial down thru' the handle you will find that you need to lean the aerial towards the front to clear the bar of the handle. This then raises the aerial "working face" above the bar -And believe it or not this faces almost perfectly at the model you are operating. Also with this set up the Tx can be laid down with the aerial now protected by the handle . Can't wait to try this out now - And it looks impressive - Well worth the outlay - Barry

by Simon

Date Added: Tuesday 11 October, 2011

Fits straight on my JR PCMX9II works perfectly, less intermitant bleeps on a poor ariel installation tells me it transmitts a stronger signal. I believe this is NOT a gimick

by Joerg

Date Added: Sunday 09 October, 2011

I did a simple range check with reduced RF power (FrSky green LED on) comparing the standard antenna with the patch antenna My transmitter was located 50cm above ground. The result is impressing: 1. original antenna: after 45m the servo movements start struggling; keeping the receiver antenna close to my body calls the fail save - so loss of connection. 2. this patch antenna: after 75m same behaviour as above, until their, no trouble. =_ just an other prove that the antenna is the best RF amplifier =_ about +50% range. Ok the normal FrSky range is sufficient for most planes or? But the antenna works as well excellent to enlarge Wifi cells...

by Dave

Date Added: Friday 30 September, 2011

This fitted my 9cap really well and you get some adjustment from 90 degree runnng true with the handle to folding backwards about 20 degrees until it hits the metal anntena but fits well so 10/10 for that You should take note that there is a back and front to these and the front has a little white sticker on so i will be adding some sort of extra sticker to remind me (not that you tend to swap them a lot )

by Paul

Date Added: Saturday 24 September, 2011

The antenna won`t fit onto my old FF7 because the carry handle is in the way and there`s not enough movement on the knuckle of the antenna.will now order the right angle adapter to see if that works.

	Contact Us \| Create An Account \| Login \| Sitemap © 2008 GiantShark \| About Us \| Privacy Notes \| Conditions of Use


		brushless motor \| lipo battery \| esc + speed controller + brushless \| lipo charger \| micro servo \| mini servo \| standard servo \| align spares