Keda KB28-35 (380S) 4000kv Brushless Inrunner

In-Stock: 3

Packed: 120.00g

Rating:
Rate it

£21.20

GiantShark Guarantee

Keda Brushless Inrunner 2835 (380S) 4000kv

Shaft Size: Φ3.17mm×12mm
Motor Dimensions: Φ27.6mm×37mm
Weight: 92g
KV: 4000
Idle current: 2.4
Resistance: 0.0426
Max amps: 30

Please note: Use only the correct length screws. If screws enter the windings the motor will be scrap and not under warranty

Additional information regarding this Motor:

The motor is usually the first piece of equipment bought for any setup. All the others lead from here... A good overview and place to start would be Nigel Hawes' Newbie Start Up Guide Part I and Part I

More Relevant Forum Posts:

Please see the Giantcod Set Up Guide for information on selecting the right motor,esc and lipo.
For Q+A on lipos in the forum click here - All Motor posts.
See this post for details on How overpropping can kill your motor (and after esc and lipo...)
To understand the role of RPM/V in motor selection choose The KV Guide
Inrunner or Outrunner - a Rough Guide by Andy2No.
Choosing a motor / prop combination using PeakEff for an online tool that can help in motor and prop selection.

Other products related to your motor:
Speed Controllers
Lipo Batteries
Propellers

Finally before buying a motor make sure you have read The Terms and Conditions regarding motor usage and their warranty.

Returns

	Issues, Discrepancies, Product Enquires		Ask a question
	Tell a friend about this product		Lowest Price Guarantee

This product was added to our catalog on .