Keda KB45-17XL 760kV 48A Brushless Inrunner

In-Stock: 1

Packed: 600.00g

Rating:

(1 review)
Avg. Rating :4
Rate it

£83.04

GiantShark Guarantee

Keda Brushless Inrunner B45-17X 700KV

Shaft Size: Φ6.0mm×16mm (Custom 3.17mm)
Motor Dimensions: Φ77mm×45mm
Kv: 700RPM/V
Weight: 557g
KV: 760KV
Idle Current: 1.6
Resistance: 0.038
Max Amps: 48A
Voltage: 36v

We are still waiting on the factory for more detailed data on these motors and will update this listing once we have it.
Please note: Use only the correct length screws. If screws enter the windings the motor will be scrap and not under warranty

Additional information regarding this Motor:

The motor is usually the first piece of equipment bought for any setup. All the others lead from here... A good overview and place to start would be Nigel Hawes' Newbie Start Up Guide Part I and Part I

More Relevant Forum Posts:

Please see the Giantcod Set Up Guide for information on selecting the right motor,esc and lipo.
For Q+A on lipos in the forum click here - All Motor posts.
See this post for details on How overpropping can kill your motor (and after esc and lipo...)
To understand the role of RPM/V in motor selection choose The KV Guide
Inrunner or Outrunner - a Rough Guide by Andy2No.
Choosing a motor / prop combination using PeakEff for an online tool that can help in motor and prop selection.

Other products related to your motor:
Speed Controllers
Lipo Batteries
Propellers

Finally before buying a motor make sure you have read The Terms and Conditions regarding motor usage and their warranty.

Returns

	Issues, Discrepancies, Product Enquires		Ask a question
	Tell a friend about this product		Lowest Price Guarantee

This product was added to our catalog on Saturday 10 November, 2007.

Reviews

by Dan

Date Added: Monday 06 September, 2010

I have tested this motor for the purpose of a high speed spindle for a hobby mill. I believe that I can use this motor but a significant disadvantage is that the idle current is around 2.5 Amps at 28 Volts which is much more that the stated value. The idle current is still reasonable for this size of motor but it can not be used without an efficient cooling jacket. With some effort I have been able to cool it with air since water was not an option for my purpose but using a water cooling jacket is probably much easier.