 |
excellent for the price and plenty long enough for APC or XOAR props and a spinner, leaving enough thread left to get the nut on, I am using an 18" x 10" prop.
Please note that in the description it quotes the 'axle' as being 10mm. this is NOT correct, the axle diameter (strange terminology) is actually 8mm diameter, absolutely perfect as far as I was concerned as it's extremely difficult to get APC-E props to bore out to 10mm, so at 8mm dia. this was a pleasant surprise.
The strange thing is though that the washer supplied does indeed have a 10mm dia. hole through so you'll need to replace that or bush it.
hope that helps
 |
|
|
